14. Software update and real tests

I've managed to test controller and software on the bike. You can download the new version of TunningPanel. Also you can download a 'sensor' log file. The only valid signals are RPM and BATT .

13. Software update

TunningPanel v0.0.4.5 Beta . You can download it.
Features:
- serial port protocol to communicate with PIC.
- display real time info: RPM, TPS, MAP, TEMPERATURE, etc...
- Save/Load received data (over serial port) in xml format.
- Save/Load tables in xml format.
- Download/Upload tables from/to PIC.
- Display sensors data in a chart. You can observe evolution of multiple sensors.
- Test indivitual functions: injectors, sparks, on/of fuel pump and o2 heater, stepper, etc...

12. PCB version 2

This is the new PCB, new design, new box.

11. The software.

Meanwhile, I worked to the software for computer. I call it "Tunning Panel". With this software i can change in the real time the injector table, spark table and all other parameters.
I use C++ , MinGW and wxWidgets. Can be compiled in Linux too.

10. Solving other problems...

Meanwhile the high pressure intank pump arrived. It is a sh Kawasaki ZX6R pump which i bought it on eBay. It cost me 39$ + 40$ shipping = 79$. I choose to use an intank pump because the low risk of fire, than an external high pressure pump.
I have to mount this pump in the GS500 tank. I am lucky because the GS500 gas tank has a flat bottom. So to mount the pump i have to crop a circular surface on the bottom. The problem now it is how to fix the pump on the tank. For this I design a flange (first of all i am mechatronics engineer ;) so this task was not so hard ). You can watch the results in the following images: